Division 6 – Eurorack Dual Sequencer Kit V2

£79.00 (Excl. VAT)

Two fully-featured and chainable sequencers in 18HP

New for 2020 – V2 Firmware chips included!

In stock

SKU: Kit_Div6_Dual-Mini-Seq_Euro Categories: , , , , Brand:


New features in Version 2 Firmware:

  • 7 sequence memories

  • 5 song memories (string sequences together)

  • Multiple gate timing modes

  • Live transpose mode

  • Live edit mode

  • Step auto-advance while programming

  • Slur notes (change CV on a step without firing gate)

  • Multiple ACC timing modes

This kit gives you two handy little sequencers behind one 18HP Eurorack panel. Why would you need more than one sequencer? Why would you need mini sequencers?

More sequencers = more steps
Use one for playing notes and the other for transposing those notes
Can be used as a clock divider
Run in parallel for multiple CVs / triggers
Each one gives you the standard CV and gate out, plus an Accent out which can be used to open up a filter, enable a glide, trigger a drum, or whatever you can think of.

The two sequencers will run completely independently, or you can daisy-chain them using the XP IN/OUT jacks to create sequences of any length.

Each sequencer has its own internal clock to get you up and running in a hurry, but you can connect an external clock if you need greater control of tempo or want to sync with other devices.

The module stores your latest sequence even when the power has been removed.

While this kit is designed to give you a Eurorack module, the PCB patterns for the jacks also have holes that will accept Johnson/Cinch-style banana jacks. There are also standoff holes on the main PCB, so you can mount them behind your own custom panel.

This module has lots of LEDs – but only two of them are ever on at a time, which keeps it from loading down your power supply.

Build Document – Dual Sequencer Build Instructions


CLK IN (External clock input)
XP IN (Expansion input; Starts sequencer back at step 1. Use for daisy-chaining multiple units)


XP OUT (Sends pulse when sequencer goes past last step. Use for daisy-chaining multiple units)
ACC OUT (Can be programmed on or off in each sequence step)


CV OUT covers 5 octaves, and can be tuned using front-accessible trim pot
Sequences can be set to any length up to 16 steps by using LOOP feature
Setting a step to REST holds previous pitch and doesn’t fire GATE
In Standby mode, sequencer can be used as a tiny keyboard without altering programmed sequences


Power supply: +/-12VDC (reverse-polarity protected!).
Power supply (Optional): +/-15VDC
Current draw: 30ma(+12V) / 0ma(-12V) / 0ma (+5)
Width: 18HP
Depth: 0.83in / 21mm

Additional information

Weight 0.1621 kg
HP Size

You may also like…

  • Music Thing Modular – Turing Machine Mkii Full DIY Kit

    £93.60£97.80 (Excl. VAT)
  • BASTL Kompas – Full DIY Kit

    £103.50 (Excl. VAT)
  • Division 6 – Eurorack Dual Mini Synthesizer Kit

    £68.00 (Excl. VAT)