THIS IS A FULL DIY KIT
It contains all components required for a complete build, right down to rack screws and power cable. We selected and used the high quality parts as specced by Random*Source.
Most of the components are already soldered! All SMD components are already fully populated and soldered, this is therefore a very quick build that mainly requires soldering of pots, jacks, LEDs and headers.
SERGE MODULAR FOR EURORACK – Under licence from Serge Tcherepnin
“Serge Modular” is an analogue modular synthesizer system developed by French composer and electronic designer Serge Tcherepnin in the 1970s at The California Institute of the Arts. Serge’s vision to create a “people’s synthesizers” led to a unique modular music system with an iconic design.
In collaboration with and under licence from Serge Tcherepnin, Random*Source offers a range of Serge modules, combining the original Serge circuits with the advantages of today’s technology. The modules on this page are in Eurorack (3U) format – modules in the classic Serge dimension (“4U” panel height) and the typical banana jacks can be found here.
SERGE SMOOTH & STEPPED GENERATOR (SSG)
The Serge Smooth & Stepped Generator (SSG) is a complex multi-functional module which can be patch programmed to provide various slew and sample functions both for audio and CV signals. It is one of the essential Serge modules.
The Smooth section will place a postitve and negative slew on input voltage transitions for lag effects, voltage controlled portamento and for low frequency filter applications.” In Cycle-mode (cycle jack patched to the input), the Smooth side “will oscillate yielding a voltage controlled triangle wave LFO. A high level into the HOLD input will enable the Smooth Function to be used as a track-and-hold circuit with voltage controlled slew rate.
The Stepped function can be used as a sample-and-hold with voltage controlled slew rate limiting. In Cycle mode, a pulse applied to the Sample input will generate complex staircase waveforms for control voltage applications and for use as audio signals.
The Coupler is an internal comparator which compares the output levels of the Smooth and the Stepped Generators. This output is useful for generating complex control voltages or random voltages.
The Random*Source version of the Smooth & Stepped Generator for Euro is a licensed and authorized adaption of the original Serge design that provides an increased audio range of the Smooth Generator and a bipolar (“hot”) Coupler output in addition to the regular (unipolar) Coupler output.
Now – for the first time ever and licenced by Serge – the SSG is available as DIY (SMT) kit for Euro.
Some details of the Random*Source Serge SSG module kit:
- Under licence from Serge Tcherepnin
- Main pcb in SMT, containing almost all components (reflow soldered in)
- No obsolete parts needed
- No wiring needed
- Eurorack format (3U), 18 hp
- Power consumption: 30mA @ +12V, 30mA @ -12V
- Module depth: < 35mm (1.5″)