XODES: Black Card Interface – DSP Card Adaptor Kits

£19.25 (Excl. VAT)

These backpack adaptor kits let you use Tiptop Audio Z-DSP cartridges with the Erica Pico DSP or Black Hole DSP MK1 / MK 2

£19.25 (Excl. VAT)

In stock

£19.25 (Excl. VAT)

Only 1 left in stock

£19.25 (Excl. VAT)

In stock

SKU: Group_Xodes_DSP_Adaptors Categories: , , Brand:

Description

These backpack kits allow for cards made for the Tiptop Audio Z-DSP to be used with the DSP modules from EricaSynths. There are individual adaptor kits for: Black Hole DSP MK1, Black Hole DSP MK2 and PICO DSP.

This little interface might be a way to give a second life to your DSP based module, allowing you to use algorithms on cards that were only usable with a bigger FX unit. If you want to use it with the Black Hole MK1 model, simply install the backpack on the EEPROM expansion port, insert your favourite card, and follow the instructions from the manual to access this external memory. With the pico or MK2 versions, be prepared to possibly void your warranty as your unit requires a minor modification to access the card. It is not recommended to perform it if you’re not familiar with SMT soldering or rework and we encourage you to let an experienced tech perform the modification for you instead.

These kits include all the parts for the backpack adaptor only, modules and cards need to be obtained separately.

Quickstart Guide | Modwiggler support thread

Note: These products are not an official add-on from the original DSP modules or algorithms cards manufacturers. XODES and Thonk cannot be held responsible for any damages following the installation and/or use of these add-ons. Be sure to check everything works before any modification and respect the card orientation before power up.

BLACK HOLE DSP MK 1

Once built, the card plugs on the expansion ROM connector and requires no modification.

All parameters are accessible, and are arranged as follows (this cannot be changed). The MK1 outputs will be fully wet :

Card:           MK1
Param1:     Dry/Wet
Param2:     Param1
Param3:     Param2

Depth: 35mm

BLACK HOLE DSP MK 2

Once built, the backpack plugs into the ROM programming connector and requires desoldering one of the 3 original EEPROMS from the Black Hole DSP which might void your warranty.

Do not try to perform this modification if you have no experience with SMT soldering.

Only the person performing the modification can be held responsible in case of trouble.

All parameters are accessible, and are arranged just like on the card.

Depth: 35mm

PICO DSP

Once built, the backpack plugs into the ROM programming connectors and requires desoldering the original EEPROM from the Pico DSP which might void your warranty.

Do not try to perform this modification if you have no experience with SMT soldering.

Only the person performing the modification can be held responsible in case of trouble.

All parameters are accessible, and are arranged as follows (this cannot be changed). The Pico outputs will be fully wet :

Card:           Pico
Param1:     Dry/Wet
Param2:     Param1
Param3:     Param2

Depth (inc. Pico): 50mm

 

You may also like…