Search Results for: joranalogue

‘Joranalogue’ style knobs

Soft Touch 6mm D-shaft knobs. These are the exact style of knobs as used on all Joranalogue modules

 

BASE DIAMETER: 12.5MM
HEIGHT: 17.1MM
SHAFT TYPE: 6MM D-Shaft

Joranalogue Test 3 – Eurorack DIY Full Kit

Test 3 is a purpose-designed tool for measuring voltages and currents in your Eurorack system, with three different test modes available. The module is designed as an easy and accurate power testing solution, able to replace any convoluted DIY test setup with multiple multimeters, custom cables etc.

Two push buttons allow you to cycle the value shown on the LED display be

tween three measurements (voltage, current and stored peak current) of the three power rails. The peak currents continually update in the background on all rails, making it ideal for quickly getting maximum current figures.

Apart from measuring the current draw of a single module, Test 3 also supports testing power supplies and cables, it can measure an entire system (up to 1 A of current on each rail), and can also be used for troubleshooting DIY modules, powering a skiff from a larger system…etc.

Test 3 Build Document – Assembly Guide

Test 3 User Guide – User Manual

Specifications

  • Measures up to 20 V and 1 A on each Eurorack power rail, including +5 V.
  • 20 mV resolution voltage measurement, 1 mA resolution current measurement.
  • Peak current values of all rails are continually updated.
  • Pre-soldered SMD parts: perfect DIY project for beginners.
  • Precision-milled 2 mm anodised aluminium front panel with high-resolution, non-erasable graphics
  • ‘Bullet-proof design’ – polarised power headers and MOSFET protection circuit.
  • Includes 16-to-16-pin Eurorack power ribbon cable.
  • Premium panel mounting hardware: black screws, black plastic washers and matching hex key
  • High-quality components and assembly; designed and made in Belgium.
  • Width: 8HP Depth: 28mm Power Draw: 35 mA +12V, 0 mA -12V 0 mA 5V

Waveform Magazine

Waveform magazine is about all sound synthesis, whether it’s hardware, software, analog, digital, keyboard based, modular, etc. The magazine prescribes to an all-inclusive approach to sound manipulation, design, and destruction.

Issue #11

Interviews with TouellSkouarn, Befaco, ALM/Busy Circuits and WORNG Electronics. Gear reviews, music reviews, DIY spotlight, and more. 88 pages full color.

Issue #10

Interviews with Cosmotronic, Five12, Schlappi Engineering, and Xaoc Devices. Gear reviews, music reviews, DIY spotlight, and more. 88 pages full color.

Issue #9

Interviews with UDO, Landscape, Mystic Circuits, and Marc Doty. Gear reviews, music reviews, DIY spotlight, and more. 84 pages full color.

Issue #8

Interviews with Rabid Elephant, DPW Designs, Joranalogue, and KNAS. Gear reviews, music reviews, DIY projects, more. 84 pages full color.

Issue #7

Interviews with Andrew Huang, Corry Banks, Hex Inverter, Trogotronic. Gear reviews, music reviews, DIY projects, more. 68 pages full color.

Issue #6

Interviews with Richard Devine, Vlad Kreimer of SOMA, Anna Martinova, and Aaron Higgins of 1010 Music. Gear reviews, music reviews, DIY projects, more. 68 pages full color.

Issue #5

Interviews with Serge Tcherepnin, Dreadbox, Tom Erbe, and Tom Whitwell of Music Thing Modular. Gear reviews, music reviews, DIY projects, more. 68 pages full color.

Issue #4

Interviews with Needham Woodworks, Metasonix, LZX, Meng Chi. Gear reviews, music reviews, DIY projects, more. 68 pages full color.

Issue #3 

Interviews with Animal Factory, KOMA Elektronik, Michael Lehman Boddicker, and Żłób Modular. Gear reviews, music reviews, DIY projects, more. 68 pages full color.

Issue #2 – Out of print

Interviews with Hainbach, Industrial Music Electronics, Noise Engineering, and Peter Blasser [Ciat-Lonbarde]. Gear reviews, music reviews, DIY, more. 60 pages full color.

Issue #1 – Out of print

Interviews with Suzanne Ciani, Dave Smith, Folktek, Noise Reap, 4ms. Gear reviews, music reviews, DIY, more. 52 pages, full color.