Description
4 Mono Channels adds four single-input channels to your expandable Tesseract Modular Tex Mix system. As Tex Mix is a fully customizable mixing solution, you can add as many channel modules as you want, as long as you have the Master Section module to chain them all together.
After the signal inputs, each channel strip features a gate input with a smooth, vactroI-like response. It does not contain any real vactroIs. Sending a gate, trigger, or pulse signal of at least 1.5V into the Gate In jacks produces a smoothly decaying effect, and there is some built-in dynamic response depending on the voltage level of the gating signal. Send, Pan and Volume knobs allow you to dial in the level and spatial orientation of each channel, while a three-position switch allows you to route the channel to either the main bus or cue bus, or simply mute the channel.
Every channel features:
- Linear VCA
- Mono Input
- SEND A control (switchable PRE/POST, in PRE mode the signal is present regardless to the channel volume control but only if the channel switch is in ON position)
- SEND B control (post-fader)
- PAN control (only affects the master bus)
- VOLUME control (affects the master, cue and POST sends, does not affect PRE-fader send)
- ON/OFF/CUE switch: ON – channel is routed to the master bus
- OFF – channel is muted
- CUE – channel is routed to the cue bus
NOTE: THIS IS AN EXPANDER MODULE AND REQUIRES THE TEXMIX MASTER SECTION IN ORDER TO FUNCTION.
Texmix 4 Mono Channels – User Manual and Build Document
Specs:
- Width: 12HP
- Depth: 21mm
- Power Consumption: 13 mA +12V, 8 mA -12V
