Befaco – Muxslicer – Partial Kit

£65.00 (Excl. VAT)

Bi-directional switch, sequencer, advanced pattern generator and more!

Note: This is a partial kit only. For the Full DIY Kit go HERE

Out of stock

You must register to use the waitlist feature. Please login or create an account
SKU: ParKit_Befaco_Muxslicer Categories: , , , , , Brand: HP Size: 16 HP

Description

This is the partial kit of the Muxlicer module. Includes PCB/Panel Set + Rare parts.

Muxlicer is a sequential signal processor designed to give a huge range of special functions to your modular setup in the minimum amount of space. The module is divided in three main blocks: a Digital Step Controller, a Gate Generator and an Analog Switch (a.k.a. Mux/DeMux).

Muxlicer can be used as a CV sequencer, advanced gate sequencer with ratchets/bursts/re-triggers and also a bi-directional 8-way sequential switch, with the ability to route one input to several outputs or several inputs to one output. The module features an internal tap tempo clock, but it can also be clocked externally with division/multiplication control. There is a reset input, EOC out, and also a clock output with it’s own division/multiplication control. The sequencer can also be CV addressed to move through it’s stages and can also be played in one-shot mode. With one-shot play through and an additional external slew limiter you can create some unique 8 stage envelopes. Muxslicer is designed with high “function to HP ratio” philosophy, giving you many options and maximum flexibility in minimum space.

FEATURES

  • Route any modular signal from one IN up to eight different Outs or vice versa.
  • Generate CV and Gate signals, being able to work as sequential voltage source a.k.a. sequencer.
  • Cut audio signals in rhythmical slices with independent volume.
  • Generate complex and dynamic patterns from any audio or modulation signal.
  • Create powerful Gate sequences with control voltage retriggering for each step.
  • Select easily when your signals act on your patch with the Address function.

This Partial kit contains:

  • 1x Muxlicer  Panel & PCB Set
  • 8x Sliding Potentiometer 30mm 100k Linear PCB
  • 9x Toggle Switch Cap Red
  • 25x Jack 3.5mm Thonkykong Mono PCB
  • 1x Mini Toggle Switch (ON)-OFF-(ON) SPDT
  • 2x Knob Micro 7.5mm Dark Grey T36 Shaft
  • 1x Knob Micro 7.5mm White T36 Shaft for encoders
  • 1x Hex Pot nut
  • 1x Rotary encoder 20 detent Push Button PCB
  • 2x Potentiometer Single gang 10k Linear PCB
  • 3x Black Bananut for Pots
  • 1x Black Bananut for Switch
  • 13x Black Bananuts
  • 12x Red Bananuts

Specs: 

  • Width: 16HP
  • Depth: 35mm
  • Power Consumption: +12V: 45mA, -12V: 5mA

Muxslicer – Build Document & BOM | User Manual | iBOM

Additional information

Weight 0.196 kg
HP Size

You may also like…

  • Befaco – Percall – Full DIY Kit

    £135.00 (Excl. VAT)
  • Befaco – Pony VCO – 3U Full DIY Kit

    £133.00 (Excl. VAT)
  • Befaco ‘Muxlicer’ – Full DIY Kit

    £110.00 (Excl. VAT)